English /a>
Headlight Renovation/Headlamp restoration kits/Headlamp Remover/Headlamp Renew/Headlight Refurbished
Application
The procedure of machine polishing is the same as manual polishing , it can be polished
with 180# first when the crack is serious ,In the case of yellowish and peeling,it can be directly
use 240 # for polishing, after that you can use 320 #, and then use 500 # and 800 # sandpaper,
bear in mind that 800 # must use manual polishing, after used 800 # sandpaper it can be
repairde,the same effect can be achieved with 1200 # sandpaper, remember that do not use #
1500 or # 2000# polishing again.When using grinding machine polish the headlamps, pouring
water and polishing must be done at the same time. remember, press hard against the grinding
machine to make sure the machine does not operate too quickly, the edge of the headlight to
camber grinding machine, special attention must be paid when the worker polishing the
headlight corner on the top of the car, must camber grinding machine, with the edge of the Angle
of the grinding machine to grind the headlight Angle!
Pay attention not to wear car paint, when polishing the headlight with a grinding machine
each piece of sandpaper must be evenly polished without omission. the function of the 320 #
sandpaper is to polish the mark that 240 # sandpaper left, if 320 # sandpaper cant get rid of the
mark , it is even harder for 500 #sandpaper, so every sand paper can't miss, and so on. The
keypoint of the headlight repair is sanding!! If the result is not good, the problem is that the lack
Matched produts:
Contact us:
Welcome email us or call us for more information
Contact Person:Nancy Yu
E mail: allplace008(@)allplace(.)cn
Skype: allplace008
Mobile(whatsapp):+86-18615607052
