—Clean the glass. Clean stains and glass fragments on the glass with the equipped blade or other suitable tools. Keep the glass surface clean and free of impurities.
—Slowly inject the repair agent from the bottom to the top of the crack. Observe the infiltration of the repair agent. You can press the edge of the crack appropriately so that the repair agent can more easily penetrate into the crack. —Cover the cured film while dripping the repair liquid. Fill the repair solution between the cured film and the glass. Use a 4-6W, 365nm curing lamp to cure for 2-3 minutes.
—After the repair adhesive is cured, tear off the cured film. Scrape off the repair adhesive that remains on the glass surface with a blade. The repair is complete.
—Park the car indoors and prohibit direct UV rays (Premature curing of the repair agent will cause repair failure).
—Clean up the damaged parts, and there must be no moisture or dust on the glass surface(Failure of the repair agent to penetrate into the crack will cause repair failure) —Remove broken glass slag. Only the repair agent penetrates into the crack, the glass can be repaired without leaving traces.
—Pressurization will make the repair agent penetrate better. It can be cured only after the injection is completed. Once cured, it is irreversible. —UV repair agent is chemical product, please avoid contact with children. —This product has slight irritation to eyes and skin. If you accidentally splash it into your eyes, immediately rinse with plenty of water. If you still have discomfort, you need to go to the hospital. If skin contact occurs, rinse immediately with soapy water. Wash contaminated clothing before wearing.
—During repairing operations, please take protective measures such as rubber gloves and masks. —This product is only suitable for industrial use.