UV Metal adhesive Glass to Metal
Features and application
1) UV curing adhesive, substrate one side need to be transparent.
2) The adhesive parts are highly transparent and resistant to yellowing.
3) The film is soft, high adhesion.
4) Fast positioning, ultra high strength.
5) It is mainly used for glass products with small bonding area (less than 5cm in diameter), crystal products, transparent lighting, transparent trophies, handicrafts and other transparent products.
Amber clear liquid
Viscosity（centigrade NO.4 cup）（25℃±1℃）
Curing time lamp spacing is less than 10CM
Colorless and transparent after curing
Small area bonding
1)Curing requirements: it is recommended to use a curing lamp with a wavelength of 340nm-370nm and a power of over 40W. The lamp can be irradiated within 15cm until it is fully cured.
2)Clean and dry the substrate before gluing.
3)When bonding, drop a small amount of glue on the bonding site, the bonding surface pressure, and eliminate bubbles; After that, use natural sunlight or ultraviolet lamp to illuminate the bonding site, the sunlight can be fully cured in 1.5 minutes, and the ultraviolet lamp can be fully cured in 1 minute. Construction operations prior to exposure must be completed in a cool place.
4)After the product is opened and used, the bottle cap should be locked tightly and placed in a cool and dry place to avoid direct sunlight.
5)Operating temperature: -30℃ ~ 130℃.
6)Glue process should avoid light, only in the curing drying can be exposed to the sun or UV lamp.
Avoid contact with eyes, skin and clothing. Slight irritation to eyes and skin. In case of accidental contact with eyes, please rinse immediately with plenty of water. If there is still any discomfort, please go to the hospital for examination. Rinse immediately after contact with skin with soapy water. Wash the clothes after contact. Keep out of reach of children.
Packaging and storage
Storage: 10℃- 27℃ in a cool dry place. Shelf life is one year. This product is non-toxic, no solvent, can be transported as non-dangerous goods.
Packing specification: 25kg/ drum, 250g/ bottle, 30 bottles/case.