UV Light Curing Clear Liquid UV Glue for Glass to Metal High Adhesive
Packaging & Delivery
1kg/bottle A small sample for testing first is avaiable.
UV Light Curing Clear Liquid UV Glue for Glass to Metal High Adhesive is a one-component, low viscosity, UV-curable liquid adhesive, is a high-strength, multi-purpose adhesive. Resistant to impact, vibration, and solvent. Cures rapidly in a short time. For rapid fixing, sealing glass and glass, glass and metal.
Tack free (s)
Completely curing energy
Hardness (Shore D)
Water absorption(%,24h@25 °C)
Elongation at break(%)
Dielectric constant (1MHz)
Dielectric loss (1MHz)
Dielectric strength (KV/mm)
Volume resistivity (Ω.cm)
Instructions for Use
The Surface to be bonded should be clean stain oil and dry.
The adhesive is applied to the object to be glued joints or protected surface. Be a wavelength of 365nm UV light irradiation, ultraviolet light can shine through to confirm the adhesion site. UV curing speed depends on the intensity of the light source and the layer of distance and time required for curing. After use, shall close the lid immediately. Subject to sizing black hose. Away from sunlight, UV light and artificial light during storage.
Keep far away from children.
Use at well ventilated place is recommoned.
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.
For further information, please refer to MSDS.
Packaging & Shipping
Store at 8-28°C,keep away from light and moisture.