English 
cheap price good quality of UV Adhesive Glue for PET /APET glass , metal etc
Quick Details
Type: UV glue
Place of Origin: Jinan, China (Mainland)
Brand Name: timesrui
Model Number: 201Y
Main Raw Material: Acrylic
Light Source: UV & LED
Color: Clear
Certificate: MSDS ISO9001:2008
Quality Guarantee: 1 year
MOQ: 1KG
| Packaging Details: | 100ml,250ml, 1L, 5L,25L, 200L... |
|---|---|
| Delivery Detail: | within 1 week |
test project | 201Y | 201C | 201-84 |
appearance | clear liquid | clear liquid | clear liquid |
Viscosity mpa.s25 | 500-550 | 170-190 | 300-450 |
Curing Energy mj/cm2 | 500-600 | 300-400 | 400-500 |
Solids | 100% | 100% | 100% |
hardness by shaoA test | 70 | 70 | 75 |
flexibility after curing | 180degree bend without cracking | 180degree bend without cracking | 180degree bend without cracking |
cured color | High Transparency | High Transparency | High Transparency |
Main Application | suit for APET ,PET , glass , metal etc material bonding . often used for PET packages, Artware , button , Window lens etc.
| suit for APET PET , glass , metal etc , often used APET folding box , suit for mahine Automation production | suit for APET PET , glass , metal etc , often used APET folding box , |
the way of using:
First,clean the surface of the material.
Second,put the glue into the metal mold, and make the PC or PET fitting the metal mold ,uses plastic squeeze glue stick discharges bubble and make the gel in leveling, determine the bonding sites are all covered by the glue.
Third,With a wavelength of 365 nm ultraviolet light irradiation. Ultraviolet light irradiation as possible as close to the glue that can speed up carving.
Fourth,Tears The PC or PET from the metal mold, the layer completely Stripped and sticked on the surface of the PC or PET . If there is difficult or impossible to Strip film, it is considered that spray a layer of release liquid at metal surface and it can be an effective solution to strip the difficult problem.
Fifth,if the Layer is not completely cured at this time and can continue to exposure to ultraviolet until the layer has been fully carved.
Notes
1. The ideal thickness of bonding layer is 0.01-0.05mm, if too thin or too thick, it will be affected to the adhesion properties.
2. Ensure that the adhesive layer to absorb enough ultraviolet energy in order to achieve the best curing effect, or possibly to influence adhesion layer.
3. Not back and forth movement of the glass, otherwise easily led to layer whitish and bonding strength decreased.
4. Residual glue can not be pumped back into the original packaging, should be stored at sealed dark room temperature and without rendering children.
Storage
Storage in the dark, sealing, ventilation, cool conditions, the ideal storage temperature is 8-28 .
Duration: 1 year
Packaging
250 g / bottle, 1 kg / bottle, 25 kg / barrel
