Professional windshield repair tool set glass crack care window
Accessories Show:
Instructions:
1.Apply a proper amount of grease to the suction cup 2.Pushing a parallel slide along the crack for operation
3. The rubber ring of the port is flattened with the 4. Rotate the piston rod clockwise to apply pressure
glass, and 0.05 ml of resin is added from above, injection, with pressure injection to make the glue
and the resin can be added again according to the better penetrate the crack.
length of the crack.
5. The port is aligned with the crack center resin that has 6.The transparent film is coated with a resin covering the
entered the crack and slowly pushes the bracket and the crack that has entered the glue.
glue appliactor.
7. Push the bracket and the glue applicator to see the resin 8. Due to the high pressure crack tip of the glue applicator,
entry from the side the resin can be injected well.
9. After the repair is completed, it is cured by UV light or 10. Remove the film and use a special blade to directly
cured in the sun for about 20 minutes. remove excess resin from the glass surface.
11. After cleaning the glass, I can't see the crsck in the distance. 12. In the near look, you will find a small thin like a
spider's silk.
Note:
Company information:
Shandong Allplace Environmental Protection Technology Co., Ltd. which was established in 1999. All those products find a good market and enjoy a good reputation at home and aboard.
