Transparent thick liquid
Viscosity (mpa) s25 ℃ / 4 ﹟ rotor)
No yellowing, good leveling
Good adhesion to aluminum
Excellent hardness and high gloss
Used as a 3D printing oligomer
1. 200KGS/plastic drum
2. 20kgs/plastic drum
3. In order to prevent the polymerization gelation reaction, please store it in a cool and ventilated place , away from sunlight and heat.Under normal storage conditions, the storage temperature should not be higher than 30 ° C, and the safe storage period can be up to 12 months.
when handling please Wear protective gloves to avoid contact with skin, eyes or clothing. In case of accidental contact, please wash with soapy water (please rinse with plenty of water in the eyes). If pre-baking is required before use, the recommended operating temperature is 50~60 °C, and the operation time is 4-8 hours.